AMSOIL DOMINATOR Racing oil 5W-20 (RD20)

AMSOIL Engine Oil – DOMINATOR 5W-20
AMSOIL oils and additives – lubrication is the last place to compromise.

Amsoil is a US-based lubricant manufacturer known for maintaining extremely high quality standards without the cost-cutting measures that have affected many traditional oil brands. The focus is purely on lubrication performance and engine durability.

In our own workshop projects Amsoil is often a requirement, not just a recommendation. A quality oil is the cheapest insurance you can buy for a tuned or heavily loaded engine.

Need an oil filter and service parts as well?
Send us your licence plate via  WhatsApp and we’ll add the correct filter and accessories to your cart.

What should you know about this product?

DOMINATOR Racing Oil is designed for competition use under high RPM, load, and temperature conditions. It is a completely uncompromising lubricant, engineered for maximum resistance to film pressure, shear forces, and heat, while ensuring minimal friction and blow-by.

This oil is built from highly thermally stable base stocks to resist oxidation at extreme temperatures. It contains approximately 1600 ppm of zinc-phosphate (ZDP), supplemented with other advanced anti-wear agents. DOMINATOR also features a significant amount of friction modifiers to reduce internal friction.

Although DOMINATOR Racing Oil is technically formulated to perform like a single-grade oil (it contains no viscosity improvers), it meets multi-grade classifications. The drain interval is approximately 3-4 races or as needed.

Dominator racing oil can also be used in very high-performance street cars. These are typically supercharged/turbocharged, catalyst-free vehicles, often running E85 fuel, with power exceeding 200 hp/liter, and driven only in summer. The maximum street drain interval is 4800 km (3000 miles). The short interval is necessary because Dominator contains minimal detergents or acid-neutralizing agents required for typical street use, as these would compete for space with the critical race-grade anti-wear components.

NOTE! If the engine has new piston rings, we recommend running the engine in with AMSOIL Break-In Oil. For example, a 30-minute tuning/break-in cycle on a dyno is sufficient, with actual pulls done on Dominator. Dominator is so slick that the piston rings will not seat (micro-hone) properly. Break-In oil is formulated to be minimally slick, allowing the piston rings to seat quickly. Break-In oil contains over 2000 ppm of zinc-phosphate, making it ideal for new camshaft break-in as well.

Technical Data (5W-20 RD20)

Packaging & Additional Info

0.95L / 1quart, 5W-20 viscosity

DOMINATOR spec sheet & technical PDF