Audi / VW EA888.3 MPI Auxiliary Injector Kit with Adapters
Add more fuel to your 1.8 TSI or 2.0 TSI EA888 Gen 3 engine with larger intake manifold injectors. This kit is designed for setups that utilize the added capacity of port injectors (typically Stage 3 builds), and especially for FlexFuel and E85 calibrations where significantly larger injectors are required. The factory 160 cc injectors quickly become insufficient when additional fueling is needed to support the direct injection system.
The kit includes genuine, flow-tested Bosch EV-14 injectors together with model-specific adapters. This injector model is commonly rated around 980 cc nominal flow, though the exact rating varies slightly depending on regional testing standards.
Specifically designed for EA888 Gen 3 engines as well as EA855 EVO 2.5 TFSI engines. Plug-and-play installation with factory wiring. Excellent atomization, fast response at low pulse widths, and sufficient fueling capability for setups exceeding 600+ HP.
- Matched genuine Bosch EV-14 injectors
- Compatible with E85 / RE85 and gasoline fuels
- Plug and play with factory wiring
- Popular with hybrid turbos and flex fuel setups
- High impedance design
- Jetronic EV1 connector with adapter
- 7-hole injector nozzle with conical spray pattern
Technical Specifications
- Maximum flow approx. 864–957 cc @ 3 bar depending on set
- Nominal flow 946 cc @ 3 bar, 1080 cc @ 4 bar, 1212 cc @ 5 bar
- Short body design, O-ring spacing approx. 34 mm
- 14 mm O-rings on both ends
- Operates at fuel rail pressures above 90 PSI
- Unmodified genuine Bosch injector
Note: Professional installation and ECU calibration are required. Always verify compatibility with your vehicle before ordering.


