MuchBoost BRD 2.0TDI hybrid turbo, Audi A4 B7 2.0TDI (230 hp)

MuchBoost BRD 2.0TDI hybrid turbo, Audi A4 B7 2.0TDI, 230 hp

A bolt-on MuchBoost hybrid turbo for applications including Audi A4 B7 2.0TDI. This upgrade is built for BRD 2.0TDI applications and retains a clean, vehicle-specific installation.

The turbo is based on original BorgWarner housings. The upgraded compressor and higher-flow turbine sides provide considerably more capacity than the factory unit, while the housings are precision-machined for the new internals.

Depending on the selected version, the manufacturer rates the turbo for approximately 230 hp. Final output depends on engine condition, the fuel system, intake, exhaust, cooling and, above all, the ECU calibration.

An upgraded turbo always requires vehicle-specific ECU calibration.

Futurez imports MuchBoost turbochargers and works with the manufacturer in Finland. You get secure delivery from a Finnish seller, a wide choice of payment methods and help selecting the correct turbo version. Every purchase also earns F* Bonus points.

Technical features

• Manufacturer-rated power potential approximately 230 hp
• Custom billet compressor wheel
• Clipped turbine wheel helps reduce exhaust backpressure
• Reinforced journal bearing system for higher boost
• Precision-machined compressor housing and seal plate
• Variable-geometry VNT system calibrated on a flow bench
• Turbo core is high-speed VSR balanced

• Original BorgWarner housings and actuator
• Compressor and turbine wheels are balanced separately, followed by high-speed VSR balancing of the complete core
• Required gasket set is included
• Bolt-on fit in place of the original turbo

Upgrade service or a complete new turbo?

You can order the turbo either by sending your original unit to us as the build core or by choosing a complete, newly built turbo.

Send my original turbo: The serviceable original housings are used to build the new hybrid turbo. After ordering, we will email the return instructions so the turbo can be sent through us for the upgrade. The work and delivery normally take around 2–3 weeks from the time the turbo arrives for inspection. The supplied unit must be original and its housings must be serviceable.

Complete new turbo: You receive a complete, ready-built hybrid turbo. Your original unit does not need to be sent in, so it can be retained or sold separately.

Read more about the core exchange process and shipping instructions.

Examples of compatible vehicle applications

• Audi A4 B7 2.0TDI – 163-170HP (MY 2004–2008)

Related OE and turbo numbers

K03109
BV430109
BV43
0109
K03-109
BV43-0109
53039700109
53039800109
53039880109
53039900109
5303
5303-970-0109
5303-980-0109
5303-988-0109
5303-990-0109
03G145702H
03G145702HV
03G145702HX
03G145702HV350

Before ordering, check the engine code and the identification numbers on the original turbo. If you are unsure about fitment, contact us with the VIN and the old turbo numbers and we will help verify the correct version.

Tip: Ask us for the gaskets, bolts, oil lines and other installation parts at the same time. A new turbo should not be installed with a restricted oil feed or leaking gaskets.

MuchBoost turbochargers carry a 12-month manufacturer warranty covering manufacturing and material defects. The warranty does not cover failures caused by external factors such as lubrication problems, unsuitable engine calibration or installation errors.