Streetec Double Bellow, pieni ilmajousi BC Racing -alustaan

Streetec Double Bellow, small air spring for BC Racing coilovers

230,00 €

Streetec Double Bellow, small air spring conversion for BC Racing coilovers. Width 140 mm, inflated height 242 mm and deflated height 87 mm. Select body thread and piston rod adapter. Price is for one air spring.

Choose

Choose type

Clear

Gain 230 F* Bonus with this product.

Ilmainen toimitus

Kaikkiin yli 250 € ostoksiin ilmainen toimitus.

We ship worldwide from the EU (Finland)

To view available shipping methods and prices including your local tax rate, add your address in the shopping cart.

SKU: streetec_cck_bc_DBS Category: Conversion kits

Description
Additional information

Streetec Double Bellow, small – air spring conversion for BC Racing coilovers

Already running coilovers, but tempted by air? The Streetec Double Bellow, small conversion replaces the steel spring on your BC Racing suspension with an air spring while retaining the existing damper. Select the damper body thread and piston rod adapter from the menus.

The price is for one air spring. Air supply and management are sold separately. The braided hose and air line adapters are also available as separate accessories.

Dimensions and specifications

Air spring type	Double Bellow, small
Width	140 mm
Inflated height	242 mm
Deflated height	87 mm
Air connection	Lower connection, 1/8-inch G thread
Maximum pressure	10 bar

Selecting the mounting dimensions

Damper body: Measure the outside diameter over the body thread. The air spring mounts on this thread in place of the lower spring perch. Available threads are M44×1.5, M50×1.5 and M53×2.0.

Piston rod: Measure the diameter of the smooth shaft that slides into the damper, then the outside diameter of the threaded tip. For example, 20–12 means a 20 mm shaft and a 12 mm threaded section. With a 12.5 mm shaft, the threaded tip diameter does not affect selection.

Check the available space

The conversion suits many BC Racing coilovers, but check the space around the bellows in relation to the body, wheel and suspension components. Rear suspension with a separate spring and damper may require a vehicle-specific solution.

Product image is for illustration.